Environment Protection - Gude GE 235 TC Instrucciones De Operación Originales

Environment Protection:

Cardboard packaging
Dispose of the waste in
material may be
an environment-aware
delivered to a salvage
manner.
point for recycling.
Packaging:
Packaging placing
Protect from rain
direction – up
Technical Data:
Mains connection
Product-specific:
Manual arc welding
Short circuit protection
with coated electrode
transformer Electrode holder
Use in Compliance with Determination
The welding unit is designed for metal welding using electrodes. The units and any accessories on the
welding site are meeting respective provisions when delivered.
The manufacturer shall not be held liable for any damages if the generally valid regulations and provisions
contained herein are not observed.
Residual Hazard and Preventive Action
Electrical Residual Hazards
Threat
Indirect electric contact
Residual heat hazards
Threat
Burns, frostbites
Radiation hazard
Threat
Infrared, visible and UV light
Defective electric and
electronic devices or
those to be disposed of
should be delivered to
a salvage point for
recycling.
Fragile!
Weight
The machine may be
used in the electrical
shock hazardous areas
Earthing tongs
Description
Simultaneous contact with
earthing terminal and the
electrode cable may result in
electrical shock.
Description
Contact with the piece to be
welded may cause serious
burns.
Splashes released in the
course of welding may harm
both the welder and his
clothing.
Description
Looking in the arc may result in
severe injury of eyes ,
Electrode diameter
according to welding
current
Downward
characteristic
Preventive Action
prevent contact
Preventive Action
Do not touch the piece being
welded use protective gloves
Wear protection clothing
Preventive Action
Always use welder protection
shield
19
230 V connection 400 V connection
Mains connection Temperature indicator
Residual Hazard
Indirect electric contact
Residual Hazard
Burns, frostbites
Residual Hazard
Infrared, visible and UV light
GB