Kenmore 110.8656 Serie Manual De Uso Y Cuidado página 7

Minimum installation spacing for cabinet installation
• The dimensions shown are for the minimum spacing allowed.
• For cabinet installation, with a door, minimum ventilation
openings in the top of the cabinet are required.
" , )
7" (17.8 crn)
a!
_;'29 crn)
0 !* 2865 0 * 27 0 *
(0cm) (72.77cm)(2.5cm) (0cm)(68.6cm)(0cm)
*Additional spacing recommended
**Side or bottom venting - additional
spacing recommended
Recommended installation spacing for recessed or
closet installation, with stacked washer and dryer
The dimensions shown are for the recommended spacing.
48 in= _ *
{310 ¢m _}
24 in=_ *
(155 cm _)
•Min. top and bottom air openings for closet doo_
3"(7,_ cm)
3" (7=6cm)
-m_ _,_ 1" (2.5 cm)
5Y2"** ==}1_
14 cm
6" {_m)
72"
(182.9 cm)
1"*** -_
{2=5 c m)
_-27"=;_ _ I "***
68=6 cm 2=5cm
**External exhaust elbow requires additional space.
***Wall, door and floor molding may require
additional spacing.
Mobile home - additional installation requirements
This dryer is suitable for mobile home installations.
The installation must conform to the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280).
Mobile home installations require:
• Metal exhaust system hardware, which is available for
purchase from your local Sears store or Sears Service Center.
Special provisions must be made in mobile homes to
introduce outside air into the dryer. The opening (such as a
nearby window) should be at least twice as large as the dryer
exhaust opening.