Play From External Audio; Using The Usb/Sd Input - auna Karaboom 100 Manual De Instrucciones

EN
20
3. Select the desired radio station by pressing the / button.
4. Once you find a station you want to save, press the MEM button on the
remote control, "P01" will be shown on the display, press MEM+/MEM-
until the desired memory position number appears on the display. Press
the MEM again to confirm and save the current station.
5. (Auto) Press and hole MEM button, The unit will automatically start
and search the frequencies ,all available stations are programmed in
the order of waveband reception strength, the first programmed radio
station is broadcast automatically.
ATTENTION: For optimal reception, fully extend and adjust the position on
the antenna

PLAY FROM EXTERNAL AUDIO

You can play from an external audio device such as MP3 player through this
unit.
Line in Jack (Requires a 3.5mm cable)
1. Connect a 3.5mm cable to the Line jack on top panel. Connect the other
end of the 3.5mm cable to an Mp3 player or other audio device.
2. Press the button to turn the unit on.
3. Press the SOURCE button to switch to Line In mode.
4. Use the controls on the connected device to begin playing audio routed
through the unit.
Auxiliary Input RCA (Requires an RCA cable)
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of
the RCA cable to the audio output on your DVD player, stereo system,
gaming system or television.
2. Press the power button to turn the unit on.
3. Press the SOURCE button to switch to Aux In mode.
4. Use the controls on the connected device to begin playing audio routed
through the unit.

USING THE USB/SD INPUT

1. Plug your USB flash drive or SD card to the USB socket or SD slot