Step 16:
LP Cylinder
•
LP Cylinder
is sold separately.
Use only with an OPD (Overfill
Protection
Device) equipped
LP Cylinder.
Fill and leak check before
attaching
to grill and regulator.
•
Place LP Cylinder
into hole in bottom
shelf with tank collar
opening
facing
to the right as
shown.
•
Tighten thumbscrew
against
tank bottom
to hold it securely
in place.
•
When the grill is in the desired
location,
lock the caster brakes;
this will help the grill stay in
place far safe operation.
•
Connect the cylinder
with the gas hose/regulator
as shown.
CAUTION
Failure to install tank correctly
may allow gas hose
to be damaged
in operation
Step 17: Tighten
all screws
and
nuts.
•
CAUTION:
Use only the regulator
provided!
If a replacement
is necessary,
call our customer
service
department,
1-888-577-9820.
Do NOT use replacement
parts that are not intended
for this grill.
26 * 23671-46477279