Dash Disassembly - Metra 95-7328 Instrucciones De Instalación

1. Unclip and remove the side trim
panels. (Figure A)
Note: Start at the bottom of the
panels.
2. Remove (2) Phillips head screws
securing the radio trim panel.
Unplug and remove panel.
(Figure B)
3. Remove (2) Phillips head screws
securing the vent panels, then
unclip and remove the (2) vent
panels. (Figure C)
4. Remove (4) Phillips screws
securing the radio. Unplug and
remove radio.
Continue to kit assembly

Dash Disassembly

(Figure A)
95-7328
(Figure B)
2
(Figure C)