Displays And Functions - Abus Secvest FUBE50001 Manual Del Usuario

Displays and functions

8. Teach in the wireless control
panel (see chapter "Read-in
process") and lock the cover
in place.
9. Once installation and
commissioning have been
completed, start the
calibration of the chip key
reader manually by
pressing the
and keys at the
same time.
The control panel must be closed and screwed in at this point, and
positioned in its final installation location.
During the calibration of the chip key reader, the status LEDs for sub-areas
1 to 4 light up one after the other (sequence of lights from top to bottom).
Keep the chip key and any other metal objects away from the chip key
reader during calibration to avoid disrupting the process!
16 EN