Festo DGC-8 Serie Instrucciones De Utilizacion página 19

DGC-8/12
4 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
These general conditions for the correct and safe use of the product must be
observed at all times.
Compare the maximum values in these
S
operating instructions with those of your
application.
The maximum permitted values, e.g. for
power supplies, forces, torques, masses,
speeds and temperatures must not be
exceeded.
Make sure there is a supply of correctly
S
prepared compressed air.
Take into account the prevailing ambient
S
conditions.
Please comply with national and local
S
safety laws and regulations.
Remove the packing with the exception of the adhesive labels on the com-
S
pressed air ports (to prevent dirt from entering) and the plastic cover on the
guide rail (only with DGC-...-G).
The packaging is intended for recycling (except for oiled paper which must be
disposed of ).
Pressurize the complete system slowly
S
(e.g. by using a safety start-up valve type
HEL-... or HEM-...).
In this way you will prevent sudden un-
controlled movements.
Use the product in its original state. Un-
S
authorized modification is not permitted.
Festo DGC-8/12 0212NH English
Fig. 5
LF-... LR-...
Fig. 6
HEL-...
QH-...
Fig. 7
19