Metra 99-9223 Instrucciones De Instalación página 5

DIN head unit provision with pocket
5. Snap the radio housing into radio
bracket and replace rear support
brackets previously removed. (Figure D)
6. Slide the DIN cage into the radio
opening, secure by bending the metal
locking tabs down. (Figure E)
7. Slide the DIN unit (radio) into the cage
until its secure. (Figure F)
8. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
9. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-9223
5
(Figure D)
(Figure E)
(Figure F)