Din Head Unit Provision With Pocket - Metra 99-9223 Instrucciones De Instalación

DIN head unit provision with pocket

1. With a Phillips screwdriver remove the
kit rear support bracket. (Figure A)
2. After removing radio, with a T-25 Torx
driver, remove (5) screws from radio
bracket. (Figure B)
3. Depress snaps on top and bottom of
pocket to remove from bracket.
(Figure C)
4. Slide radio bracket off of radio.
Continue on next page
Kit Assembly 99-9223
4
(Figure A)
(Figure B)
(Figure C)