Fairing Disassembly - Metra 82-9601 Instrucciones De Instalación

FLH/Batwing models:
1. Cover the front fender.
2. Remove (2) T-27 Torx bolts from inner
fairing (under mirrors) (Figure A, step 2)
3. Remove (2) T-27 Torx bolts from outer
edges of inner fairing near the fork tubes
(facing forward) (Figure A, step 3)
4. Remove (3) T-27 Torx bolts from bottom
edge of windshield. (Figure A, step 4)
Note: Windshield and fairing will
be loose once these screws are
removed. Use extreme caution not
to damage fairing or windshield.
5. Remove windshield taking caution
that the outer fairing is loose.
Continued on next page

Fairing Disassembly

Step 4
Step 2
(Figure A)
82-9601
Step 3
2
Step 2