Kit Assembly - Metra 82-9601 Instrucciones De Instalación

1. Using 3 of the screws in the
provided hardware, mount the
speaker adapter to the inner
fairing. The 4th inner bottom screw
locations are not used on FLH/
batwing models. For Road Glide
models, rotate the adapter until
the notches in the adapter do not
hit the factory mounting posts, and
make sure the flat spots on the
outside of the adapter are toward
the outer edge of the fairing.
(Figure A)
2. Mount the new speaker with
the hardware provided with the
speakers. Do not re-use the factory
screws. (Figure B)
Note: For the Roadglide and
Sharknose models, the longer
screw may be needed in the lower
mounting hole depending on the
new speaker.

Kit Assembly

(Figure A)
82-9601
(Figure B)
6