Metra 99-5716 Instrucciones De Instalación

Ford/mercury 2000-2003

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-5716
Ford/Mercury 2000-2003
KIT FEATURES
• ISO DIN head unit provisions
• Incorporates factory climate controls into installation
KIT COMPONENTS
• A) Integrated mounting kit • B) ISO Faceplate • C) Tuner bypass • D) ISO Brackets
• E) (2) #8 x 3/8" Phillips pan head screws
A
E
• 86-5618 Head unt removal keys • Torx head screwdriver
APPLICATIONS
99-5716
B
WIRING & ANTENNA CONNECTIONS (included)
Wiring Harness:
• Included with dash kit
Antenna Adapter:
• 40-FD10
TOOLS REQUIRED
METRA. THE WORLD'S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
C
metraonline.com
D

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-5716

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-5716 APPLICATIONS Ford/Mercury 2000-2003 99-5716 KIT FEATURES • ISO DIN head unit provisions • Incorporates factory climate controls into installation KIT COMPONENTS • A) Integrated mounting kit • B) ISO Faceplate • C) Tuner bypass • D) ISO Brackets •...
  • Página 2: Tabla De Contenido

    – DIN head unit provision ....................7 – Trunk provision ........................8 CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
  • Página 3: Dash Disassembly

    Dash Disassembly 99-5716 Ford Taurus/Mercury Sabel 2000-2003 1. Using the 86-5618 removal keys pull the factory radio/climate control panel from the dash. (Figure A) 2. Disconnect the vacuum hose harness and connectors from the audio system, blower motor switch, A/C dampener door switch, and potentiometer.
  • Página 4: Kit Preparation

    Kit Preparation 99-5716 Ford Taurus/Mercury Sabel 2000-2003 1. Turn the factory climate control dials into a vertical position and pull the dials off. (Figure A) 2. Remove (2) 5/16” hex head screws securing the temperature/fan control switches and remove switches. Unclip the climate control switch and remove.
  • Página 5 Kit Preparation 99-5716 Ford Taurus/Mercury Sabel 2000-2003 5. Remove (2) Torx head screws securing the mounting clips to the sides of the factory radio/climate control panel and remove the clips. (Figure E) 6. Mount the clips to the integrated mounting kit with the same Torx head screws.
  • Página 6: Kit Assembly

    (Figure A) 3. Locate the factory wiring harness in the (Figure A) dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 4. Reassemble dash in reverse order of disassembly.
  • Página 7: Din Head Unit Provision

    2. Slide the aftermarket head unit into the cage and secure. (Figure A) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
  • Página 8: Trunk Provision

    Kit Assembly 99-5716 Trunk provision 1. Open the trunk, remove (4) pop-clips from the driver’s side trunk liner. Remove liner. (Figure A) 2. Locate the factory tuner on the wall of the trunk and disconnect the speaker and antenna plugs. (Figure B) Note: It is not necessary to remove the tuner.
  • Página 9 Notes...
  • Página 10 Notes...
  • Página 11 Notes...
  • Página 12 INSTALLATION INSTRUCTIONS FOR PART 99-5716 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...
  • Página 13: Componentes Del Kit

    Arnés de cableado: • Arnés de cableado se incluye en kit Adaptador de antena: • 40-FD10 HERRAMIENTAS REQUERIDAS • Llaves de remoción Metra 86-5618 • Destornillador Torx METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...
  • Página 14 – Cajuela provisión ......................8 PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar el ciclo de ignición.
  • Página 15: Desmontaje Del Tablero 99-5716

    Desmontaje del tablero 99-5716 Ford Taurus/Mercury Sabel 2000-2003 1. Usando las llaves 86-5618 de remoción, saque el radio de fábrica/panel de control de clima del tablero. (Figura A) 2. Desconecte el arnés de la manguera de vacío y los conectores del sistema...
  • Página 16: Preparación Del Kit 99-5716

    Preparación del kit 99-5716 Ford Taurus/Mercury Sabel 2000-2003 1. Gire los selectores del control de clima de fábrica para que queden en posición vertical y jale los selectores para quitarlos. (Figura A) 2. Quite los (2) tornillos de cabeza hexagonal de 5/16” que sujetan los interruptores de control de temperatura y del ventilador y retire los interruptores.
  • Página 17 Preparación del kit 99-5716 Ford Taurus/Mercury Sabel 2000-2003 5. 1. Quite los (2) tornillos de cabeza Torx que sujetan los ganchos de montaje a los lados del panel del radio/control de clima de fábrica y quite los ganchos. (Figura E) 6.
  • Página 18: Ensamble Del Kit 99-5716

    (Figura A) (Figura A) 3. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS. Vuelva a conectar el terminal negativo de la batería y pruebe la unidad para verificar que funcione correctamente.
  • Página 19: Provisión De Unidades Din

    (Figura A) 3. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS. Vuelva a conectar el terminal negativo de la batería y...
  • Página 20 Ensamble del kit 99-5716 Cajuela provisión 1. Abra la cajuela, quite los (4) ganchos a presión del revestimiento de la cajuela del lado del conductor. Quite el revestimiento. (Figura A) 2. Localice el sintonizador de fábrica en la pared de la cajuela y desconecte los conectores de la bocina y la antena.
  • Página 21 Notas...
  • Página 22 Notas...
  • Página 23 Notas...
  • Página 24 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5716 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...

Tabla de contenido