Metra INST-2003 Instrucciones De Instalación página 23

ISO DDIN radio provision
1. Remove the center bar from the ISO DDIN trim
plate. (Figure A)
2. Attach the ISO DDIN brackets to the radio. First align
the holes, and then secure the radio to the brackets
using the screws supplied with the radio. (Figure B)
(Figure A)
INST-2003
Kit Assembly
3. Snap the bracket and radio assembly to the ISO
DDIN trim plate. (Figure C)
4. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Test the radio for
proper operation.
(Figure B)
23
5. Reassemble the dash in reverse order
of disassembly.
(Figure C)