Dodge Ram 2006-2008 (Mini Center Console) , 2500/3500 2009, 2500/3500 Chassis Cab 2010 - Metra 99-6507 Instrucciones De Instalación

Dodge Ram 2006-2008, 2500/3500 2009, 2500/2300 chassis cab 2010
1. If vehicle has floor shifter, remove
shifter knob. Then remove center
console inserts, if present. (Figure A)
2. Remove screws securing the rear
center console to the floor panel.
Lift up on the rear center console to
clear the gear shift lever, if present.
(Figure B)
3. Remove screws securing the front
(Figure B)
Dash Disassembly 99-6507
(with mini center console)
center console to the floor panel.
Unclip and remove the front center
console.(Figure C)
4. Remove (2) Phillips head screws at
bottom of dash. Unsnap and remove
lower panel.
5. Remove (2) Phillips screws facing up
on front edge of radio/climate control
panel. (Figure D)
(Figure C)
6. Unclip and remove entire panel
surrounding radio and climate
controls, including A/C vents.
(Figure E)
7. Remove (4) 7mm screws securing
radio to dash and remove radio.
Continue to kit assembly
(Figure D)
5
(Figure A)
(Figure E)