Items Supplied; Technical Data; Proper Use - EINHELL DSW 250 Manual De Instrucciones De Operación Y Mantenimiento

Anleitung DSW 250
GB
Dear Customer,
Before you use the orbital sander for the first time,
please read these instructions and note the
information for the tool's operation and maintenance.
Always keep this manual with the tool.

1. Items supplied

1 orbital sander
1 plug-in nipple R 1/4"

2. Technical data

Permissible working pressure max.
Air consumption
Speed
Sanding area
Recommended hose diameter internal
Air quality
Air supply
via conditioning unit with filter
pressure reducer and mist oiler
Compressor capacity
approx. 250 l/min. equivalent to a motor
rating of 2.2 kW
Work settings
6 bar working pressure set at the
pressure reducer or filter pressure reducer
Please note:
When working with the orbital sander, be sure to
wear the necessary protective clothing,
particularly goggles.
Observe the safety regulations.
4
08.11.2001 8:57 Uhr
6 bar
approx. 170 l/min.
approx. 7000 orbits/min.
169 x 92 mm
Ø 9 mm
cleaned and oiled
Seite 4
3. Illustration
A
Item. Description
A trigger lever
B connection for plug-in nipple
C plug-in nipple

4. Proper use

The orbital sander is a pneumatic tool for universal
service.
The exhaust air leaves the tool to the rear.
Repairs and maintenance work are to be carried out
only by authorized specialist workshops.
Please note!
The power of the tool will be reduced if you use a
hose that has too small an inner diameter or
which is too long.
B
C