Installation Of The Ceramill Mind And Ceramill Map Software; Installation Of The Scanner; Activating Additional Modules - Amann Girrbach Ceramill map 400 Modo De Empleo

I N S T A L L A T I O N
5.4.2 Installation of the Ceramill Mind and
Ceramill Map Software
E N
The PCs are factory-shipped with a basic installa-
tion. The Ceramill Mind and Ceramill Map software
are to be installed by the user in this sequence.
For the installation, login as Administrator is
required:
▷ Insert the Ceramill Mind CD provided.
▷ Open the installation instructions on the CD and
follow the instructions.
▷ Insert the Ceramill Map CD provided.
▷ Open the installation instructions on the CD and
follow the instructions.
To switch to the desired language for the installed
software components:
▷ On the desktop, open
tor , follow the instructions and select the
installed scanner.
34
Manual Language Selec-
5.5

Installation of the Scanner

As each scanner is individually factory-cal-
ibrated, the data on the installation CD are
only valid for the respective scanner.
Prior to installation:
▷ Check if the serial number of the scan-
ner on the type plate is identical with the
serial number stated on the CD!
Prior to installation:
▷ Make sure that the main switch of the scanner is
positioned on 0.
▷ Connect the two enclosed USB cables to the
scanner and the PC.
▷ Plug the Ceramill Mind Dongle in a USB port on
the rear side of the PC.
▷ Connect the mains cable to the power supply
connection of the scanner as well as to a mains
socket outlet.
5.6

Activating Additional Modules

Additional modules must be activated in the scan-
ner software before they can be used.
▷ Click on
Options > Access > Activation Code ...
enter the received scanner-specific activation
code.
▷ Restart the software to activate the module.
,