Installation Of The Scanner; Set-Up Instructions - Amann Girrbach Ceramill map 100 Instrucciones Para La Instalacion Uso Y Manutencion

Q u I C K G u I D e I n s ta L L at I o n
Ports anD swItCHes
Supply PC
A
USB ports for keyboard, mouse, scanner
B
and dongle
GB
Digital ports screen
C
Switch port Internet
D
Fire Wire port PC
E
Network connection Motion
F
Port scanner
!
USB port scanner
@
Main switch scanner
#
InstaLLatIon
set-uP InstruCtIons
_ After unpacking the unit, please check for
possible transport damage. Should you find any
damage, please claim the damage with your
supplier immediately.
_ The device is to be used exclusively within dry,
closed rooms.
_ The room temperature should range between
18 and 30 ° C, and larger temperature fluctuations
are to be prevented.
_ The device is to be placed on a solid working
12
attention:
A picture of the scanner connections
can be found on the back flap!
table or a work bench (important with Ceramill
Map 300 natural movement).

_ The opening of the scan chamber has to be
away from windows and strong artificial lighting.
(Ceramill Map 100).
InstruCtIon For tHe
ConneCtIon oF tHe monItor
For the connection of the monitor to the digital
port please exchange the standard blue VGA
C
cable (analogue) with the white DVI cable (digital)!
InstaLLatIon oF tHe sCanner
ImPortant note: Due to the fact that each
scanner is individually calibrated by the factory,
the data on the installation CD are only valid
for the respective scanner. It is advisable to
compare before the installation whether the
serial number of the scanner is identical with
the specification plate as stated on the CD.
Before installation: check whether the main
switch of the scanner is positioned on 0.
#