Adjusting The Seat; Infant Body Support - GB IDAN Manual Del Usario

adJusting the seat

1
the seat has a headrest that automatically adjusts the harness height without
the need to rethread it. the head rest may be adjusted up and down
through eleven positions to fit your baby.
the gB idan is shipped in the lowest position
with the infant Body support already in position.
Unbuckle the harness and chest clip.
place the child in the infant carrier, with their
back flat against the infant carrier seat back.
adjust for your baby by pulling up on the gray plastic
no Rethread harness adjuster
head rest up until the harness slots are at or Just
BeloW your child's shoulders.
note: Regularly check for proper harness
height as your child grows.
2

infant BodY suPPoRt

the infant Body support will help provide a
better harness fit for smaller babies, as well as
stability for the torso. it must be used for
infants who weigh less than 11 lbs (5kg) or
reach 3 months.
Removing the infant BodY suPPoRt
in order to remove the body support, unfasten
the snaps and remove body support.
USInG the Infant CarrIer
(a)
while sliding the
1
a
2
a
23