GB IDAN Manual Del Usario página 25

Ocultar thumbs Ver también para IDAN:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7
pull up on harness straps to make snug around
the child's hips while holding the harness Buckle
in place.
8
slowly pull the adjuster strap to tighten the
shoulder straps. a snug strap should not allow
any slack. it lies in a relatively straight line without
sagging. it does not press on the child's flesh or
push the child's body into an unnatural position.
9
position the center of the chest clip level with the
child's armpits. make sure the shoulder pads do
not interfere with the placement of the chest clip.
if the shoulder pads don't allow a proper fit,they
can be removed to provide more space for the
chest clip. Unsnap to remove.
10
harness Pinch test. to test for a properly
tightened harness, pinch the shoulder strap. a
snug harness should not allow you to pinch any
slack when pinched between your thumb and
forefinger. if needed, pull adjuster strap further for
a tight and proper fit.
to keep child warm, place a blanket over child
and infant carrier, afteR you have properly
secured and tightened harness around your child.
neveR secure child in infant Carrier dressed in
a bulky garment or heavy clothing.
USInG the Infant CarrIer
7
9
10
8
25

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para GB IDAN

Tabla de contenido