Approvals; Overview; Testing Standards - Mettler Toledo 64060625 Manual Del Usuario

2

Approvals

2.1.

Overview

This chapter covers
•
Overview
•

Testing Standards

•
U.S. Approval
•
European Approval
•
Canadian Approval
•
IECEx Approval
2.2. Testing Standards
Table 2-1 shows the list of standards to which the 64060625 battery pack has been tested. The
date of the standard is also included.
ANSI / IEC 60529 (edition
CSA-C22.2 No. 1010.1
CSA-C22.2 No. 60529
64062816 | 05 | 04/2016
This chapter provides information about safety approvals for the intrinsically safe 64060625
battery pack. Please read this chapter thoroughly before beginning installation.
Appendix A at the end of this manual contains the approval certificates and control drawings
for the approvals. These documents should also be reviewed before beginning the
installation.
Standard
Electrical Equipment for Use in Hazardous (Classified) Locations, General
Class 3600
Requirements
Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I,
Class 3610 II, & III, Division 1 and Class I Zone 0 & 1 Hazardous (Classified)
Locations
Nonincendive Electrical Equipment for Use in Class I, and II, and Class III,
Class 3611
Divisions 1 and 2, Hazardous (Classified) Locations.
Class 3810 Electrical and Electronic Test, Measuring and Process Control Equipment
Degree of protection provided by enclosures (IP Code)
2.1)
Intrinsically Safe and Non-incendive Equipment for Use in Hazardous
CSA-C22.2 No. 157
Locations
CSA-C22.2 No. 142 Process Control Equipment
Safety Requirements for Electrical Equipment for Measurement, Control
and Laboratory Use - Part 1: General Requirements
Degree of Protection Provided by Enclosures (IP Code)
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
Table 2-1: Testing Standards
Description Date
1998
1999
2004
2005
2004
1992
1990
2004
2005
2-1