Approvals; Overview; Testing Standards - Mettler Toledo 30538111 Manual De Instalación

2

Approvals

2.1.

Overview

This chapter provides information about safety approvals for the intrinsically safe
64060625/30538111 battery pack. Please read this chapter thoroughly before beginning
installation.
Appendix A at the end of this manual contains the approval certificates and control drawings for the
approvals. These documents should also be reviewed before beginning the installation.
2.2.

Testing Standards

Table 2-1 shows the list of standards to which the 64060625/30538111 battery pack has been
tested. The date of the standard is also included.
ANSI / IEC 60529 (edition 2.1) Degree of protection provided by enclosures (IP Code)
64062816 | 09 | 05/2021
3
Standard
Electrical Equipment for Use in Hazardous (Classified) Locations,
Class 3600
General Requirements
Intrinsically Safe Apparatus and Associated Apparatus for Use in
Class 3610 Class I, II, & III, Division 1 and Class I Zone 0 & 1 Hazardous
(Classified) Locations
Nonincendive Electrical Equipment for Use in Class I, and II, and
Class 3611
Class III, Divisions 1 and 2, Hazardous (Classified) Locations.
Electrical and Electronic Test, Measuring and Process Control
Class 3810
Equipment
Intrinsically Safe and Non-incendive Equipment for Use in Hazardous
CSA-C22.2 No. 157
Locations
CSA-C22.2 No. 142 Process Control Equipment
Safety Requirements for Electrical Equipment for Measurement,
CSA-C22.2 No. 1010.1
Control and Laboratory Use - Part 1: General Requirements
CSA-C22.2 No. 60529 Degree of Protection Provided by Enclosures (IP Code)
Electrical apparatus for explosive gas atmospheres – Part 0: General
EN 60079-0
requirements
METTLER TOLEDO NiMH Battery Pack Installation/Technical Manual
Table 2-1: Testing Standards
Description Date
1998
1999
2004
2005
2004
1992
1990
2004
2005
2012
2-1