Manual Storing Of Station Presets; Automatic Memory Of Station Presets; Tuning To Preset Stations; Cd/Mp3/Wma - Alpine IVA-D310 Manual De Operación

Ocultar thumbs Ver también para IVA-D310:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Manual Storing of Station Presets

1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch [P1/2] to change the function guide.
3
Touch [MEMORY].
4
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] within 5 seconds.
The selected station is stored.
5
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 18 stations can be stored in the preset memory (6
stations for each band; FM1, FM2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.

Automatic Memory of Station Presets

The tuner can automatically seek and store 6 strong stations in the
selected band in order of signal strength.
After selecting the desired band, touch [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into
[P.SET 1] to [P.SET 6] in order of signal strength.
When the automatic storing has been completed, the tuner goes
to the station stored in [P.SET 1].
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.

Tuning to Preset Stations

You can tune in the preset stations in memory on each band using the
preset number.
1
After selecting the desired band, touch [P1/2] to
change the function guide.
2
Touch any one of the preset buttons [P.SET 1]
through [P.SET 6] that has a station stored to it.
The preset station is received.

CD/MP3/WMA

Display example for MP3/WMA main screen
[SOURCE] button: Refer to page 12
[VISUAL] button: Displays the VISUAL selection screen
[SETUP] button: Displays the SETUP selection screen
[
] button: Refer to page 13
[
] button: Refer to page 24
CD:
1
Displays track text*
in the upper line.
1
Displays Disc Text*
in the lower line.
MP3/WMA:
After displaying the file name in the upper line, the track
name is displayed if there is ID3 tag information.
After displaying the folder name, the album name/artist
name are displayed if there is ID3 tag information.
CD:
Displays the track number/disc number*
MP3/WMA:
Displays the folder number/file number/disc number*
elapsed playback time
1
*
Displayed when a CD text disc is inserted.
2
*
Displayed when a CD changer is connected.
3
*
Displayed when an MP3 compatible CD changer is connected.
2
/elapsed time.
3
/
15
-EN

Publicidad

Tabla de contenido
loading

Tabla de contenido