Gas Burner; Exploded View; Scrapping; Guarantee - Whirlpool MC/A 150 Instrucciones De Instalación Y De Manutención

E031002AW
Close the bands, with the nomex thread, above
the introducing
Pinch one of the metal hook at the end of the
band to avoid withdrawing of the nomex thread.
Remember to introduce the bands in the right
direction (nomex texture toward the outside and
cut at 45° downwards). Eventually stretch the
introducing bands
To stretch the nomex ironing bands open the
two side shoulders of the machine and screw the
pins connected to the stretching eyelet of the
bands. Symmetrically operate on the right pin
inside the right shoulder and on the lone inside
the left shoulder in order to stretch the bands in
the same way.
Replacement of the nomex bands. Take the
upper protection off. Open the two side shoulders
of the machine and unscrew the pins connected to
the stretching eyelet of the bands. After having
completely unloose the old bands, slide them
away and replace them one by one with the new
ones. Close the new bands, with the nomex
thread, above the introducing roller. Pinch one of
the metal hook at the end of the band to avoid
withdrawing of the nomex thread. Remember to
introduce the bands in the right direction (nomex
texture towards the outside, covering of the
conjunction in the same direction of the roller
direction). Eventually stretch the ironing bands.
Replacement of the detaching linen belts. Take
the upper protection and replace the detaching
linen belts by knotting them. Do not stretch too
much.
16. GAS BURNER CLEANING (for gas-working
drying ironer)
Any ordinary or extraordinary maintenance must
be performed by qualified staff. Open the left side
with its key. Take the exhausting regulator off,
unloose the junction and the supporting screws.
Take the burner off and start cleaning the external
surface using a cloth. Check that the holes are
not obstructed. In case of partial or total
obstruction clean them properly. IMPORTANT: do
not use screw drivers or pointed tools which may
cause damage to the internal components.
17. EXPLODED VIEW AND SPARE PARTS
To consult the exploded views and find out the
spare parts, please see the builder website, inside
roller. the technical area. Before entering the web site
check the serial number of the machine and its
production period.

18. SCRAPPING

When a machine cannot work anymore, you have
to scrap it in conformity of current legislation,
splitting up between metal parts, plastic and glass
parts.

19. GUARANTEE

Starting from the shipment date, guarantee
includes:
36 months anti-corrosion on inner/outer
drum and external panels in s/s.
24 months on microprocessor, electronic
timer and inverter drive.
Electronic parts should be not under
warranty if the protection boxes will be
opened.
12 months on mechanical parts; this
guarantee covers hidden defects related
to manufacturing or material quality.
The following
guarantee:
components subjected to wear such as
belts, gaskets, led and rubber pieces.
electric
switches, heating elements, inlet and
outlet valves.
Request for spare parts under warranty must be
asked by fax with the details of damages, models
and serial number of machine.
Under guarantee the delivery of spare parts is
done with carriage forward. Spare parts are
invoiced in any case. Faulty components must be
sent under prepaid carriage after receipt of
authorisation. The authorisation number must be
quoted in the documents sent with faulty parts.
The assistance service will prepare a report within
30 days from the date of receipt of the part; this
report will be sent to the Client possibly together
with a credit note.
As per the attached document concerning
"guarantee terms", in order to benefit from
the manufacturer's guarantee, the owner
has to respect completely the instructions
of this manual and in particular he has to:
16
components are not
components such as
operate in accordance
machine usage limits;
perform an accurate and regular
maintenance;
24/11/04
under
coils,
with