Scratch; Seamless Loop/Hot Start/Stutter - Denon DN-S3500 Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SCRATCH

7
You can Scratch in CD or Sampler mode.
T. T T
ET
w
ECHO/LOOP
FLANGER
FILTE
L L
R
CUE
DISC
EJECT
e
Select Platter source
q Select the source to be
scratched using the PLATTER
SOURCE
SOURCE button.
1
MAIN:
The PLATTER SOURCE button
lights up in orange.
SAMPLER: The PLATTER SOURCE button
lights up in green.
(Only when a sample is loaded)
RELAY
A A
PARAMETER
P P
S
PUSH ON/OFF
F F
KEY ADJUST
PITCH
RANGE
BRAKE
DUMP
REVERSE
q
Select Scratch direction
w Select the direction for
2
scratching
using
the
SCRATCH direction select
lever.
Scratch Disc
e When MAIN is selected as
the Scratch mode and
Scratch Disc is turned by
3
hand, the Main Track (CD)
is being scratched.
When SAMPLER is selected as the Scratch
mode and Scratch Disc is turned by hand,
the sample is being scratched.

SEAMLESS LOOP/HOT START/STUTTER

8
Seamless Loop/Hot Start/Stutter (A1, A2 buttons)
Operation display (refer to the
section describing the display)
POWE
ON
OFF
SAMP. P P
B
H
CLR
B TRIM
REV. V V
PITCH/V / / OL.
T
T. T
Setting the A point
(loading the Hot Start data)
q Push the A1 or A2 button to
set the A point. (Hot Start
data loading starts.)
• A1 and A2 buttons can be
1
used separately for each
Hot Start.
• When an A point is set, the corresponding
A button and "
that button is set to the Hot Start mode.
• The BPM is set independently for each
Hot Start automatically.
Starts Hot Start
FWD
w When A1 or A2 button is
2
pushed, Hot Start playback
BOTH
starts from the corresponding
A point.
Setting the B point for Seamless Loop
e When the B button is
pushed after setting the A
point or after starting Hot
start playback, the B point is
3
-1
set and Seamless Loop
playback starts from the A
point.
• The B button works with respect to the A
point.
9
ENGLISH
t, y
q, w, y
O
ET
• If the B button is pushed during Seamless
Loop playback or after EXIT playback, the
B point moves to the point at which the
3
-2
button was pushed.
A1
• When the B point is set, the B and "
indicators light up in the display.
Playing Seamless Loops
• When the B point for A1 is detected after
playback started from A1 point, playback
" display lights up and
returns to A1 point with seamless. While
4
A1 to B looping, B point for A2 is ignored.
• When the B point for A2 is detected after
playback started from A2 point, playback
returns to A2 point with seamless. While
A2 to B looping, B point for A1 ignored.
A1
Exit/Reloop
r In Seamless Loop playback,
you can force exit or return
to the loop.
EXIT:
During
Seamless
B
5
playback, push the EXIT/RELOOP button to
exit from loop. DN-S3500 continues
playback after the B point.
RELOOP:
When the EXIT/RELOOP button is pushed
after exit the loop, Seamless Loop playback
resumes from the A point instantly.
ENGLISH
e, y
r
A2
B
EXIT/
B TRIM
RELOOP
CONT. T T
FILE SEARCH
MODE
RELAY
A A
PARAMETER
P P
S
PUSH ON/OFF
"
EXIT/
RELOOP
Loop

Publicidad

Tabla de contenido
loading

Tabla de contenido