Using The Appliance For The First Time; Preparations For Use; What Water To Use; Filling The Tank - DeLonghi FXG175AT Instruciones Importantes

H. Thermostat knob
I. "Self Clean" button
L. "Turbo" button
M. Water measure

USInG THe APPLIAnCe FOR THe FIRST TIMe

• The first time you use the iron, remove the plate protection
(if present).
• When used for the first time, the appliance may give off
smoke and an odor for several minutes. This is caused
by heating and subsequent drying of the sealers used
in assembling the appliance. You are recommended to
ventilate the room.

PRePARATIOnS FOR USe

What water to use

The machine works with normal tap water.
If the water is very hard, we recommend using demineralized
water diluted 50/50 with tap water.
Never use distilled water alone.
Never use chemical substances or detergents (e.g. perfumed
water, essences, descaling solutions, etc).

Filling the tank

Danger!
It is important that the iron is always unplugged from the outlet
every time you fill up the water tank.
• Make sure the appliance is unplugged from the outlet.
• Make sure the steam regulator d is in the
("dry") (fig. 1).
• Open the tank fill hole cap C.
• Fill the measure to the level mark (300 ml), then pour the
water into the iron (fig. 2).
• Close the tank fill hole cap.
8
position