Bulid-In Dvd Player Operations - Lenco DVT 1946 Manual De Usuario

BUILD-IN DVD PLAYER OPERATIONS
The following types of discs can be played on this unit.
Disc type and logo mark
DVD
CD
Region Number
Region number (Regional restriction code) is built-
in to the unitand DVD video discs.Region number
"2" of DVD video discs can be used on this unit.
DVD Video Disc
DVD video discs are divided into titles, and the titles are sub-
divided into chapters.
Title 1
Chapter 1 Chapter 2
There are the marks on some DVD video disc package.
Examples:
Multiple languages
3
2
Multi-language subtitles
Multi-angle
3
16:9 LB
Multi-aspect
1
Region number
Closed caption
Audio CD Disc
Audio CD discs are divided into tracks.
Track 1 Track 2
CAUTION:
• Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, CVD, VCD, etc. cannot beplayed.
• This unit can play back the DVD-R that has recorded
movie data as well. However, some DVD-Rs cannot be
played back depending on the recording conditions.
• The DVD-R that has no movie data cannot be played
back.
• The DVD-RW (Video mode) can be played back.
However, some DVD-RWs cannot be played back
depending on the recording conditions. The DVD-RW (VR
mode) cannot be played back.
• The DVD+R/+RW can be played back. However, some
DVD+R/+RWs cannot be played back depending on the
recording conditions.
TM
Title 2
Chapter 1 Chapter 2
Track 3 Track 4
Handling, Storing and Cleaning Discs
• Do not touch the disc door while it is moving.
• Never put anything except a 5-inch (12cm) or 3-inch
(8cm)DVD (or CD) into the disc in/out slot. Foreign
objects can damage the unit.
• Fingerprints and dust should be carefully wiped from
the signal surface of the disc (glossy side) with a soft
cloth. Wipe in a straight motion from the center to the
outside of the disc.
• Never use chemicals such as record cleaning sprays,
antistatic sprays or fl uids, benzene or thinner to clean
the discs. These chemicals will permanently damage
the plastic surface of the disc.
• To remove a disc from its storage case, press down
on the center of the case and lift the disc out, holding
it carefully by the edges.
• Discs should be returned to their cases after use to
protect them from dust and scratches.
• To prevent warping the disc, do not expose it to
direct sunlight, high humidity or high temperatures for
extended periods of time.
• Do not apply paper or write anything on either side of
Chapter 3
the disc. Sharp writing instruments, or the inks used
in some felt-tip pens, may damage the surfaces of the
disc.
Basic Playback
" " may appear on the TV screen during operation. This
icon means that the function is not available on the disc now.
Preparations
1. Turn on the TV and press [SOURCE] to select the input
source as "DVD",
2. Insert the disc (label facing away from you) to the disc in/
Track 5
out slot (side panel) until it clicks.
The TV starts to play automatically the fi rst fi le/track/chapter.
Stop Playback
[CD]
Press [l] to stop the playing back disc temporarily, press
this button again to resume playback.
[DVD]
Press [n] once to stop the playing back disc temporarily.
Press [n] twice to stop the playing back disc completely.
E13