Dvd Playback Operation; Dvd Playback - Lenco DVT-1541 Manual De Operación

DVD Playback Operation

Preparation
1. Press the POWER button to turn on the unit. Press the INPUT or DVD button to select DVD
mode.
2. Holding the disc with its label side outward vertically to the disc tray.
3. Slightly put the disc into the disc tray and it will be drawn into the unit and load automatically.
Warning: Do not play poor quality discs that may damage the player's lens.

DVD Playback

Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don't match, the disc cannot be played. This player's default code is region 2.
Play
Press the PLAY button to start playback.
Stop
During playback, press the ■STOP button once to stop playback and press the
resume normal playback. Press the stop button twice repeatedly to stop playback completely.
Pause
Press the PAUSE button to pause playback; press again to start step-by-step playback. Press the
PLAY button to resume normal playback.
Fast Playback
During playback, press the
fast playback, press the
or button to activate fast backward or forward playback. During
PLAY button to resume normal playback.
- 37 -
PLAY button to