Olsberg Orayonne Instrucciones página 34

Mounting glass radiation heater on the wall bracket (see chapter "Electrical connection).
Caution: The heater must be mounted on the wall bracket without rear panel hiders. The hiders must
also first be removed before the heater can be detached from the bracket.
Magnet
Rectangular
opening
Rear panel hider
1
1
Fig.10: Detail „Top view"
1
Hold the hider and align it so that
the side with the magnets faces the
rear panel of the heater and the
rectangular openings of the hider
are at the same height as the
sleeves at the rear panel of the
heater. Slide the hider along the
wall to the stop at the rear of the
heater.
To dismantle the rear panel hiders, complete the above steps in reverse order.
34
Fig.9
2
2
Pull the hider towards
the rear panel of the
heater until the mag-
nets are attached.
3
3
Push the hider further
to the second stop.