Maintenance; Warranty; Spare Parts; Troubleshooting - Agrilaser Autonomic Manual De Usuario

Resetting the Agrilaser Autonomic removes all data. After restoring to
factory settings, new patterns have to be created and assigned to new
times slots for continued system operation.
After completing the patterns and time settings,
press 'START' at the right bottom of the screen to
activate the Agrilaser Autonomic for automated bird repelling.
Click 'LOGOUT' to exit the software application.
Do not unplug the USB-cable from the Agrilaser
Autonomic or from your computer before logging out,
as this may lead to loss of settings.

5. Maintenance

CAUTION: Always switch off the Agrilaser Autonomic before
performing maintenance.
Perform the following maintenance steps (at least) once a week:
• Check if the Agrilaser Autonomic cannot wobble or tilt on its position. If
stability has been diminished, add more ballast to the frame or sucure the
system more firmly to the environment.
• Check if the Agrilaser Autonomic executes its patterns on the intended areas.
Perform the following maintenance steps (at least) once a month:
• Clean the lens by using a wet cloth. By cleaning the lens, undesired
reflections and a reduced effectiveness are prevented.
• Check if the movement of the system is hampered in any way. Remove any
foreign matter between the moving parts of the motor platform.
• Adapt the machine time settings to local time (only necessary when local
time has changed).
Storage
The Agrilaser Autonomic is designed to withstand outdoor environments. When
not used over an extended period of time, it is however recommended to store
the Agrilaser Autonomic in a dry environment at temperatures above 0 °C.
The Agrilaser Autonomic can be cleaned by using a wet cloth.
Do NOT use a high pressure pump for cleaning as this could damage
the product.
Disposal
Do not dispose of the Agrilaser Autonomic together with household
material. Recycle in accordance with local regulations.

6. Warranty

CAUTION: Disassembly attempts of the product voids warranty.
The Agrilaser Autonomic is developed and produced according to the
highest quality standards. Should you encounter any problems with your model,
please carefully read this manual and the Installation Guide. If your Agrilaser
Autonomic shows a defect or if you would like any help, please contact your
local Agrilaser dealer. Should any defect arise as a result of production faults,
free repair or replacement is guaranteed. The Agrilaser Autonomic has a
warranty period of 12 months, starting on the date of purchase. In case of
replacement, the warranty period of the original product will remain valid.
Warranty conditions
The warranty is valid if the Agrilaser Autonomic is used according to the
instructions of the manual and for the purpose for which it was designed.
12
The warranty is valid when a valid receipt is presented which shows the date
of purchase, the name of the dealer and the product name.
The warranty is invalid when:
„ STaRT
• Damage due to falling or jolting occurs.
• The serial number has been removed.
• Parts of the product (laser unit, laser module, emergency push button or
adapter) are disassembled.
LOG OUT
• Any (attempts of) repairs have been carried out by unauthorized persons.
• Any defects occurred as a result of using other equipment than provided
by Bird Control Group (for example, but not only, using a different adapter).
• Any defects occurred as a result of misuse or use in environments that are
not prescribed.
• Any defects as a result of environmental influences.
• The defect is due to normal wear of replaceable parts, such as, but not
only, the battery.

7. Spare parts

The following spare parts are available for the Agrilaser Autonomic. For
requests of spare parts contact your local Agrilaser dealer.
Description
Laser module
Motor platform
Emergency stop
Power adapter (EU, UK or US)
Supporting frame
USB-cable
Agrilaser Software (on USB drive)

8. Troubleshooting

If the Agrilaser Autonomic is not performing as expected, check the LED
indicator on the back of the laser module to identify the system status.
LED indicator appearance System status
Red continuously
Red blinking
Orange continuously
Orange blinking
Green continuously
Green blinking
None
Red continuously: An error occurred. Turn off the Agrilaser Autonomic by
pressing the ON/OFF button. Make sure all cables are connected properly
and the power adapter is in place. In addition make sure no objects are stuck
between the moving parts. After at least one minute, turn on the Agrilaser
Autonomic by pressing the ON/OFF button. Make sure the emergency
switch is released.
Red blinking: The battery power is low (in case of a battery powered
system). Consider replacement of the battery or switch to city power supply
to continue operation.
Error
Low battery
Teaching mode
Standby, calibrating
Operational, preparing for burst, bursting
Operational, waiting for next burst
No power