Locking Function - Telstar THE072320MD Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LOCKING FUNCTION

The accessories can be pulled out approximately halfway until they lock in place. The locking function pre-
vents the accessories from tilting when they are pulled out. The accessories must be inserted into the cavity
correctly for the tilt protection to work properly.
When inserting the wire rack, ensure the wire rack is onto the right facing direction like
the picture
.
1 3
When inserting the backing tray, ensure the backing tray is onto the right facing direction like the picture
Optional accessories
You can buy optional accessories from the after-sales service, from specialist retailers or online. Please see your
sales brochures for more details.
When purchasing, please always quote the exact order number of the optional accessory.
Note
Not all optional accessories are suitable for every appliance. When purchasing, please always quote the
exact identification number of your appliance.
ENERGY EFFICIENT USE
1.
Remove all accessories, which are not necessary during the cooking & baking process
2.
Do not open the door during the cooking & baking process
3.
If you open the door during cooking & baking, switch the mode to "Lamp" (Without change the tempera-
ture setting)
4.
Decrease the temperature setting in not fan assisted modes to 50°C at 5min to 10min before end of cook-
ing & baking time. So you can use the cavity heat to complete the process.
5.
Use "Fan Heating", whenever possible. You can reduce the temperature by 20°C to 30°C
6.
You can cook and bake using "Fan Heating" on more than one level at the same time.
7.
If it is not possible to cook and bake di erent dishes at the same time, you can heat one after the other to
use the preheat status of the oven.
8.
Do not preheat the empty oven, if it is not required.
9.
If necessary put the food into the oven immediately after reaching the temperature indicated by switching
o the indicator light the first time Do not use reflective foil, like aluminum foil to cover the cavity floor
35
35
BUILD IN OVEN
THE072320MD
1 4

Publicidad

Tabla de contenido
loading

Tabla de contenido