Telstar THE072320MD Manual De Instrucciones página 44

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Fault
The appliance does not work.
Knobs have fallen out of the
support in the control panel.
Knobs can no longer be turned
easily.
Fan does not work all the time in the mode: "Fan
Heating"
After a cooking process a noise can be heard and a air
flow in the near of the control panel can be observed.
The food is not su cient cooked in the time given by
the recipe.
Uneven browning
The lamp doesn't turn on
Possible Cause
Faulty fuse.
Check the circuit breaker in the fuse box.
Check whether the kitchen light or other kitchen
Power cut
appliances are working.
Knobs can be removed.
Knobs have been
Simply place knobs back in their support in the
acci-dentally
control panel and push them in so that they engage
disengaged.
and can be turned as usual.
Knobs can be removed.
To disengage knobs, simply remove them from the
support.
Alternatively, press on the outer edge of knobs so
that they tip and can be picked up easily.
There is dirt
Carefully clean the knobs using a cloth and soapy
under knobs
water.
Dry with a soft cloth.
Do not use any sharp or abrasive materials.Do not
soak or clean in the dishwasher.
Do not remove knobs too often so that the support
remains stable
This is a normal operation due to the best possible
heat
distribution and best possible performance of the
oven.
The cooling fan is still working, to prevent high
moisture conditions in the cavity and cool down the
oven for your convenience. The cooling fan will
switch o automatically.
A temperature di erent from the recipe is used.
Double
check the temperatures. The ingredient quantities
are
di erent to the recipe. Double check the recipe.
The temperature setting is too high, or the shelf level
could be optimized. Double check the recipe and
settings.
The surface finish and or color and or material of the
baking ware were not the best choice for the se-
lect-
ed oven function. When use radiant heat, such as
"Top & Bottom Heating" mode, use matt finished,
dark colored and light weighted oven ware.
The lamp needs to be replaced.
44
BUILD IN OVEN
THE072320MD
Notes/remedy

Publicidad

Tabla de contenido
loading

Tabla de contenido