8. Connect the Light Cables
Connect the two light cables from the mirrors to the connectors from the power box.
Tuck the wires into the mirror.
For K-99572-TL and K-99573-TL: Verify that the swinging panels move freely without binding the
cables.
Turn on the electrical power to the dimmer switch.
Use the dimmer switch to test the lights for proper operation.
Install the Caps
Press the caps to the top and bottom of the mirror.
For K-99572-TL and K-99573-TL: Install the caps to the top and bottom of the swinging panels.
1292979-2-A
12
Kohler Co.