Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
Storing the Vacuum Cleaner
When not in use, press on the cord rewind button
to store the cord. Store the dusting brush & crevice
tool in their proper place on the back of the vacuum
cleaner.
CARE & CLEANING
Dust Tank Components
The dust tank consists of several key components.
Always make sure that all parts are properly
reinstalled after emptying the dust tank.
NEVER operate the vacuum cleaner without all
filters in place!
NEVER operate the vacuum cleaner with wet
filters or components!
Key components
1~2. Foam Pre Filter:
Captures medium to fine particles.
It consists of Filter frame & Foam Filter.
These are washable.
3. Dust tank lid:
Open to access Foam pre filter.
4. Dust separator:
Separate dust from air coming in.
5. Side door:
Open to remove dirt from dust separator.
6. Emptying dirt release:
Press down to open the bottom plate.
7. Dust tank:
Where dirt is collected.
8. Bottom plate:
Open to empty the dust tank.
9. Prevention Lever:
Prevent using without Foam pre filter.
1. Filter frame
2. Foam filter
4. Dust separator
7. Dust tank
8.Bottom plate
3. Dust tank lid
9. Prevention Lever
5. Side door
6. Emptying dirt release
15