Prime The Water Pump; Locate Strainer Basket Into Water Source - Briggs & Stratton 073019 Manual De Usuario

Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983
Discharge Head
- 81 feet (25m)
Maximum

Prime the Water Pump

1. Remove priming plug from top of pump.
2. Fill pump with clean, clear water up to top of discharge
outlet.
3. Replace priming plug.
Improper treatment of water pump can damage it and
shorten its life.
• Be sure pump chamber is filled with water before starting the
engine. NEVER run pump without priming.
12
NOTICE
www.mymowerparts.com
Total Head
- 106 feet (32m)
Maximum
Suction Head
- 25 feet (8m)
Maximum

Locate Strainer Basket Into Water Source

Place strainer basket into water to be pumped. Basket must
be fully immersed in water.
NOTICE
Improper treatment of water pump can damage it and
shorten its life.
• NEVER operate pump without strainer connected to end of
suction hose.
• Keep strainer out of sand or silt, place in bucket or on stones.
• DO NOT let pump run dry or damage to seals may result.
BRIGGSandSTRATTON.COM