Briggs & Stratton Generac Generator Discount Parts Call 606-678-9623 or 606-561-4983
Stopping the Water Pump
1. Move engine speed lever to "Slow" (
2. Push on/off switch to "Off" position.
3. Turn fuel valve to "Off" position.
Backfire, fire or engine damage could occur.
• DO NOT stop engine by moving choke control to "Choke"
position.
Drain and Flush Water Pump
1. Disconnect and drain suction and discharge hoses.
2. Remove drain plug at bottom of pump.
14
) position.
WARNING
(
www.mymowerparts.com
3. Remove primer plug from top of pump and flush
internal components of pump with clean water.
)
4. Replace both plugs and finger tighten.
BRIGGSandSTRATTON.COM