Procom QEB100 Manual De Usuario página 11

INSTALLATION - CRHQD250T, Q SERIES, B23 SERIES,
PCSD25RT, CRHSD25RT AND FBD400 SERIES
12. Bundle the wiring with the cable tie (see
Figure 29). Attach cable tie to the stove
through the hole as shown in Figure 29.
This is to avoid any heat damage. Actual
heater may vary from illustration. BD23
Series models have the cable tie hole in
the top panel. For all other models, the
hole will be to the right of the blower ac-
cess opening.
PCSD25RT Shown
Figure 29 - Securing Blower Wires
200070-01A
Cable Tie
Fixed
Hole
Cable
Tie
BD23 Series
www.usaprocom.com
13. CRHQD250T and Q Series Remove 2
screws securing grill to stove front. Care-
fully set grill aside (see Figure 30).
CRHSD25RT and PCSD25RT Rotate
handle and open the door.
Figure 30 - CRHQD250T and Q Series
14. Remove logs and carefully set aside. Note
log placement before removing.
Fixed
Hole
Removing Grill
11