Grounding Instructions; Care And Maintenance - Procom QEB100 Manual De Usuario

This heater is for use on 120 volts. The
cord has a plug as shown at A. An adapter
as shown at C is available for connecting
three-blade grounding-type plugs to two-slot
receptacles. The green grounding lug ex-
tending from the adapter must be connected
to a permanent ground such as a properly
grounded outlet box. The adapter should not
be used if a three-slot grounded receptacle
is available.
Using rocker switch, turn blower on and
check for operation. Turn on rocker switch to
the desired position. In the MAN position the
blower will remain constantly on. In the AUTO
Always disconnect the appliance
from the main power supply and
allow it to cool before any servic-
ing operation.
The motors used on the fan heater and flame
blower are pre-lubricated for extended bearing
life and require no further lubrication.
14

GROUNDING INSTRUCTIONS

OPERATION

CARE AND MAINTENANCE

www.usaprocom.com
Grounding Pin
C
Adapter
Grounding Means
position the blower will be controlled by the
temperature sensor. To stop the operation turn
rocker switch to the O position.
Periodic cleaning/vacuuming of the appliance
around the air intake and exhaust, as well as
the fan heater is recommended. For heavy
or continuous use, periodic cleaning must
be done more frequently. If the heater blows
alternating cold and warm air, check the fan
for free movement and for debris restricting
air flow. If the fan does not move freely, the
unit must be turned off and the fan replaced
immediately in order to prevent further dam-
age to the unit.
A
Cover of
Grounded
B
Outlet Box
Metal Screw
200070-01A