User Safety - Electrolux HSG Panini Manual De Utilización

WARNING: GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical
short circuit, grounding reduces the risk of electric shock by
providing an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is properly
installed and grounded;
WARNING - Improper use of the grounding can result in a risk
of electric shock.
Consult a qualifi ed electrician or serviceman if the grounding
instructions are not completely understood, or if doubt exists as
to whether the appliance is properly grounded, and either:
1) If it is necessary to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding plug, and a 3-slot
receptacle that will accept the plug on the appliance. The marked
rating of the extension cord shall be equal to or greater than the
electrical rating of the appliance, or
2) Do not use an extension cord, if the power supply cord is too
short, have a qualifi ed electrician or serviceman install an outlet
near the appliance.
3 – SAFETY AND USE
Before starting the appliance, carefully read this handbook. The
instructions and information given in it are important for correct
and optimum use.
3.O PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY
(a) Do not attempt to operate this appliance with the lid open - lid
operation can result in harmful exposure to microwave energy. It
is important not to defeat or tamper with the safety interlocks.
(b) Do not place any object between the lid and the working top
or allow soil or cleaner residue to sealing surfaces.
(c) Do not operate the appliance if it is damaged.It is particularly
important that the lid closes properly and there is no damage to

3.1 USER SAFETY:

Before each use, the user is responsible of verifying the general
integrity and cleanliness of the appliance and stop or no using
it in case of noted, dirt, damage or missing parts.
• The appliance is intended for professional use, not for hou-
sehold application, and must be used by personnel trained for
the purpose.
• The appliance is designed for direct heating/cooking of sand-
wich. Any other use is to be considered improper.
• Cooking surfaces are strong but not unbreakable and can
be damaged by hard or sharp objects if falling on the top with
a certain force. In the event of breaks, fl aws or cracks, STOP
USING and contact the Assistance Center.
• Do not use the appliance to warm sandwich into metallic pots,
pans, sheets, utensils
• The appliance is designed to heat/cook sandwich: do not heat
any kind of metallic object with the appliance.
• Do not run the appliance without any load.
• Periodically clean the appliance, removing all traces of sandwich;
failure to keep it clean will lead to deterioration of the surfaces, and
thus affect appliance life and give rise to hazardous situations.
• Have the appliance fully checked periodically (at least once
a year). For that purpose, it is advisable to stipulate a mainte-
nance contract.
NEVER press button of control board with something else than
fi ngers.
Do not place hands or objects on the appliance, and keep it out
of the reach of children.
Important!
The appliance has an internal air cooling system (back and sides).
The air intake and outlet openings of the appliance must not be
blocked with objects or cloths, otherwise excessive overheating
and damage to the appliance could occur.
5
See
HSG GB 06 2009
for minimal distances.
Earthing is mandatory, using a green conductor.
2-9-1 Power cable
Whenever the power cable has to be replaced, call a technical
service agent and replace by original spare parts: only the manu-
facturer of the appliance is authorized to supply the replacement
part and carry out disassembly and reassembly of the compo-
nents, directly or through Authorized Assistance Centers.
Important!
Repair and maintenance work must be carried out only by qualifi ed
personnel authorized by the manufacturer.
2-9-2 Circuit breaker
Always install a main switch with thermal magnetic cut-out up
line of the appliance in order to be able to isolate it from the rest
of the system. Contact opening distance and maximum leakage
current must comply with current regulations
2-9-3 Equipotential node and ground connection
Connect the appliance to a socket with ground
the: lid (bent), hinges and latches (broken or loosened), contact
surfaces.
(d) The appliance should not be adjusted or repaired by anyone
except properly qualifi ed service personnel
ANY POTENTIAL USER OF THE EQUIPMENT SHOULD
BE TRAINED IN SAFE AND CORRECT OPERATING
PROCEDURES.
IMPORTANT
- During operation, pay attention to the hot
zones of the exterior surface.
- Do not place objects on the outlets located
at the top of the appliance. See
3
Warning!
The cooking zones remain hot. Even with the appliance swit-
ched off.
MICROWAVE INSTRUCTIONS
IMPORTANT - IF THE LID OR GLASS IS DAMAGED, THE AP-
PLIANCE MUST NOT BE USED UNTIL IT HAS BEEN REPAIRED
BY AUTHORIZED PERSONNEL;
WARNING - IT IS DANGEROUS FOR ANYONE EXCEPT
AUTHORIZED PERSONNEL TO CARRY OUT MAINTENANCE
OR REPAIR OPERATIONS INVOLVING THE REMOVAL OF ANY
COVER PROTECTING AGAINST EXPOSURE TO MICROWAVE
ENERGY.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY :
- Do not attempt to operate this appliance with the lid open,
it can result in harmful exposure to microwave energy. It is
important not to defeat or tamper with the safety interlocks.
- Do not place any object inside the lid cover.
- Do not operate the appliance if it is damaged. It is particularly
important that the lid close properly and that there is no damage
to the glass.
- Do not run the appliance without any load.
The appliance should not be adjusted or repaired by anyone
except properly qualifi ed service personnel.
6/11
5