NEC MULTEOS M40 Manual De Instrucciones página 33

SCHEDULE SETTING
SCHEDULE LIST
DATE & TIME
YEAR
MONTH
DAY
TIME
DAYLIGHT SAVING
SCHEDULE RESET
PIP
KEEP PIP MODE
PIP MODE
OFF
PIP
POP
SIDE BY SIDE (ASPECT)
SIDE BY SIDE (FULL)
PIP SIZE
SMALL
MIDDLE
LARGE
PIP POSITION
TEXT TICKER
PIP RESET
OSD LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
SVENSKA
Creates a working schedule for the monitor to use. See page 35 for instructions.
List of schedules.
Sets the date, time, and daylight saving region. Date & time must be set in order for the
"SCHEDULE" function to operate.
Resets the following settings within the SCHEDULE menu back to factory setting:
OFF TIMER, SCHEDULE SETTINGS.
Allows the monitor to remain in "PIP" mode after powering off. When Power is returned,
PIP appears without having to enter the OSD.
Picture-in-Picture
Selects the size of the sub-picture used in Picture-in-Picture (PIP) mode.
Determines where the PIP appears on the screen.
Allow text insertion within main screen. The TEXT TICKER and PIP functions cannot
be used simultaneouslly. If the PIP function is on, it will be deactivated and vice versa
if the TEXT TICKER is turned on.
Resets the following settings within the PIP menu back to factory setting:
KEEP PIP MODE, PIP MODE, PIP SIZE, PIP POSITION.
Select the language used by the OSD.
English-29
OSD Controls
- continued