Advanced Option - NEC MULTEOS M40 Manual De Instrucciones

HEAT STATUS
FAN CONTROL
SCREEN SAVER
GAMMA
BRIGHTNESS
MOTION
SIDE BORDER COLOR
AUTO BRIGHTNESS
DVI, VGA, RGB/HV
input only
CHANGE SECURITY
PASSWORD
SECURITY LOCK
DDC/ CI
DISPLAY
PROTECTION RESET

ADVANCED OPTION

INPUT DETECT
All inputs except for TV
NONE
FIRST DETECT
LAST DETECT
VIDEO DETECT
LONG CABLE ON/OFF
VGA and RGB/HV input only
LONG CABLE MANUAL
VGA and RGB/HV input only
Displays status of the COOLING FAN, BRIGHTNESS and TEMPERATURE.
Note: The M40/M46 does not have FAN 3.
Cooling fan reduces the temperature of the display.
Use the SCREEN SAVER function to reduce the risk of Image Persistence.
The gamma curve becomes narrow, reducing contrast and cutting down the risk of
image retention.
The brightness is decreased when "ON" is selected.
The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT,
LEFT) at user determined intervals.
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
Adjusts the brightness level according to the input signal.
Allows the security password to be changed. Factory preset password is 0000.
Locks the security password.
ENABLE/ DISEABLE: turn on or off the two way communication and control of the monitor.
Resets the following settings within the DISPLAY PROTECTION back to factory setting:
POWER SAVE, STANDBY MODE, FAN CONTROL, SCREEN SAVER, SIDE BORDER
COLOR, AUTO BRIGHTNESS.
Selects the method of input detection the monitor uses when more than two input
devices are connected.
The Monitor will not search the other video input ports.
When the current video input signal is not present, then the monitor searches for a
video signal from the other video input port. If the video signal is present in the other
port, then the monitor switches the video source input port to the new found video
source automatically. The monitor will not look for other video signals while the current
video source is present.
When the monitor is displaying a signal from the current source and a new secondary
source is supplied to the monitor, the monitor will automatically switch to
the new video source. When current video input signal is not present, the montor
searches for a video signal from the other video input port. If the video signal is present
in the other port, then the monitor switches the video source input port to the
new found video source automatically.
DVD/HD or VIDEO inputs will have priority over DVI, VGA, and RGB/HV. When DVD/HD
or VIDEO input signal is present the monitor will change and keep to the DVD/HD
or VIDEO input.
Compensates for image degradation caused from using a long cable.
Manually compensates for image degradation caused from using a long cable.
English-31
OSD Controls
- continued