Lansinoh AFFINITY Instrucciones Para El Uso página 8

Troubleshooting / Technical Data
Troubleshooting the Lansinoh
®
Interruption of Electrical Service
If you experience an interruption in the normal operation of the electrical and/or
mechanical functioning of the pump, simply do the following:
Unplug the AC adapter cord from the electrical outlet.
n
Wait a few seconds, and then plug the AC adapter cord back into the electrical outlet.
n
Discomfort While Pumping
If you feel any discomfort, you may need a different size flange.
Visit www.lansinohstore.com or call 800-292-4794.
Decreased Suction
If it feels like the suction has decreased, try the following:
Set cycle to its highest level (L6). The highest cycle setting creates a
n
slower pumping rhythm, which combined with the highest suction level
(L8), allows the Affinity Breast Pump to operate at its greatest level for
®
milk expression.
Remove the tubing and tubing connector from the back of the pump and place a
n
finger over the pump outlet. If you feel suction, the pump is operating properly, but
the Breastmilk Expression Set may not be correctly assembled or the white valve
may be damaged. If no suction is felt on your finger, try unplugging the adapter from
the electrical outlet, wait a few seconds, and plug it back into the electrical outlet.
Make sure the Breastmilk Expression Set has been properly assembled. Check the as-
n
sembly information in the section "Assembling the Breastmilk Expression Set",
Inspect the white valve for a tear or pinhole. This component is critical to achieving
n
proper suction. Replace the white valve with one of the spare valves provided with
the product.
When single pumping, check the tubing adapter on the back of the pump to make
n
sure it is closed for single pumping. If open, close the adapter.
If double pumping, ensure that the breastmilk expression set is on both breasts
n
before starting the pump.
Increased suction level for single pumping:
If it feels like the suction is higher than usual when single pumping, check that the plug
for the pipe is clean and that the airway in the plug is not blocked.
Breastmilk Buildup in Breast Flange or Breast Flange Body
If breastmilk does not appear to drain fast enough into the bottle, reduce the suction
setting on the pump to allow the milk to drain. Once milk has drained into the bottle,
you may gradually increase the suction level.
Regulatory Compliance
Technical Data
Type BF Applied Part
Power Requirements
AC Adapter (included)
AC Adapter – North American
Plug Configuration
To maintain your power adaptor follow these instructions:
110Vac/220Vac wall plug type AC
adapter, galvanically isolated
adapter with 9Vdc output voltage
Batteries (not included)
DO NOT wrap
6 AA batteries, 1.5V alkaline or
cord of power
1.2V rechargeable
adaptor around
the plug body.
13
DO NOT use power adaptor if damaged.
Affinity Breast Pump
®
CORRECT
DO NOT unplug
power adaptor
by pulling on the
cord.
Limited Consumer Product Warranty (United States)
This product is warranted to the original consumer purchaser (the "purchaser")
to be free from defects in material and workmanship which are not commercially
acceptable for the period of one year from the date of purchase on the pump
mechanism and the period of 90 days on all other product components. Warranty
coverage terminates if you sell or otherwise transfer this product to another person.
This warranty gives you specific legal rights and you may also have other rights,
which vary, by location.
LANSINOH
®
THE PRODUCT OTHER THAN THOSE WARRANTIES EXPLICITLY SET FORTH
HEREIN. ANY IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, TO THE EXTENT PERMITTED BY LAW, SHALL BE
LIMITED IN DURATION TO A PERIOD OF 90 DAYS FROM THE DATE OF
PURCHASE BY THE ORIGINAL PURCHASER.
In the event the product is found by Lansinoh
warranty, as purchaser's sole and exclusive remedy Lansinoh
option of Lansinoh
parts or labor. The purchaser shall bear all expense for returning this product to
page 8
. Lansinoh . This warranty does not apply to any product that has been subjected
®
to misuse, abuse, or alteration. Only Lansinoh
recommended for use with Lansinoh
incorrectly performed maintenance or repair, or use of non-Lansinoh
replacement parts may invalidate this warranty.
TO THE EXTENT PERMITTED BY LAW, LANSINOH
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES IN-
CLUDING, BUT NOT LIMITED TO, REPLACEMENT COSTS RESULTING
FROM THE BREACH OF ANY WRITTEN OR IMPLIED WARRANTY.
If you wish to make a claim under this warranty, you must return the product to
Lansinoh Laboratories Inc., prepaid, together with your dated bill of sale or other
dated proof of purchase and a brief statement of the problem, along with a Return
Authorization (RA) number. You may obtain the appropriate Return Authorization
number and shipping address by calling the phone number or sending an email to
the email address provided below.
Items returned without an associated Return Authorization Number will be returned
to sender.
To obtain the address to Return goods to:
To obtain a Return Authorization Number:
CORRECT
Warranty
MAKES NO EXPRESS WARRANTY OF ANY KIND REGARDING
® to not meet the above limited
, replace this product without charge for such replacement or
®
®
breastfeeding products. Improper or
®
800-292-4794
customerservice@lansinoh.com
800-292-4794
customerservice@lansinoh.com
will repair or, at the
®
brand replacement parts are
brand
®
SHALL NOT BE
®
14