Carel MasterCase2 Hoja De Instrucciones página 19

FIELDBUS tLAN network / PST terminal connection
type
connector for PST terminal
connector for tLAN
maximum distance from the controller
max num. of tLAN peripherals
max num. of PST terminals
cable
Note:
• the PST terminal and a tLAN peripheral cannot be connected at the same time.
Options available
BMS serial boards (see Fig. 4.c)
PGE100EV2* driver option (see Fig. 4.d) CAREL E
PCO100CLK0 clock board (see Fig. 4.e) RTC board for saving the time even when the controller is off
(1)
: Hardware compatibility refers to the possibility to use one or the other board depending on the application software.
tLAN asynchronous half duplex
4 pin JST connector
2 pin plug-in connector, pitch 3.81 mm
10 m for both the PST terminal and other peripherals in the tLAN
5
1
use the special CAREL connection cable, code PSTCON0*B0
all the current options developed for the pCO1 (RS232, RS485, LON, pCOWEB, etc.)(1)
2 V valve driver (with valve power supply supplied by the control device).
Fig. 4.c
Fig. 4.e
19
Fig. 4.d
+05P000190 rel. 1.1 del 10.01.07