Sharp AR-P27 Guía De Instalación De Software página 19

10
When you are asked how the printer is
connected, select [Connected to this
computer] and click the [Next] button.
If you are using Windows NT 4.0, go to
step 12.
11
When the interface selection screen
appears, select [Parallel] and click the
[Next] button.
12
Select the printer port and click the
[Next] button.
Select "LPT1" for the printer port.
USING THE MACHINE WITH A PARALLEL OR USB CONNECTION
If "LPT1" does not appear, another
Note
printer or peripheral device is using
LPT1. In this case continue the
installation, and after the installation is
finished, change the port setting so
that the machine can use LPT1. This
procedure is explained in "Another
printer is using the parallel port (when
using a parallel cable)" on page 27.
13
When the model selection window
appears, select the model name of your
machine and click the [Next] button.
14
When the printer driver selection window
appears, select the printer driver to be
installed and click the [Next] button.
• Select the checkboxes of the printer
drivers to be installed.
• When the PC-Fax driver is being
installed, this screen does not appear.
Go to the next step.
• To use the PS printer driver or the
Note
PPD driver, the PS3 expansion kit
must be installed.
• The [PPD] checkbox only appears if
you are using Windows 2000.
15
Select whether or not you wish the
printer to be your default printer and
click the [Next] button.
If you are installing multiple drivers, select
the printer driver to be used as the default
printer.
If you do not wish to set one of the printer
drivers as the default printer, select [No].
17