Sharp AR-P27 Guía De Instalación De Software página 38

MAC OS 9.0 - 9.2.2
10
Select the PPD file.
(1) Click the PPD file for your model.
(2) Click the [Select] button.
• If the above dialog box does not
Note
appear and you return to the
"Chooser" dialog box, follow these
steps to select the PPD file manually.
(1) Make sure that the machine is
selected in the "Select a
PostScript Printer" list, and then
click the [Setup] button followed
by the [Select PPD] button.
(2) Select the PPD file for your
model and click the [Open]
button.
(3) Click the [OK] button.
• The PPD file is installed in the
[Printer Descriptions] folder in the
[Extensions] folder.
11
Make sure that the machine is selected
in the "Select a PostScript Printer" list
and then click the [Setup] button.
12
Click the [Configure] button.
To automatically configure the settings
Note
based on the installed machine
options that are detected, click the
[Auto Setup] button.
36
13
Select the machine configuration.
(1)
(1) Select the options that are installed on
(2)
the machine.
(2) Click the [OK] button.
Note
14
Click the [OK] button in the window of
step 12 to close the window.
15
Click the close box (
"Chooser".
This completes the configuration of the
printer driver.
Installing the screen fonts
The screen fonts for Mac OS 9.0 - 9.2.2 are
contained in the [Font] folder of the "PRINTER
UTILITIES" CD-ROM that accompanies the
PS3 expansion kit. Copy the fonts that you wish
to install to the [System Folder] of the startup
disk.
Note
You can check the options that are
installed and the tray settings by
printing out the "PRINTER SETTINGS
LIST" in the custom settings of the
machine. Follow these steps to print
out the "PRINTER SETTINGS LIST":
Press the [CUSTOM SETTINGS] key,
touch the [LIST PRINT] key, touch the
[PRINTER TEST PAGE] key, and
then touch the [PRINTER SETTINGS
LIST] key.
) to close the
If you experience problems that may
be due to the installed screen fonts,
immediately delete the installed fonts
from the system.
(1)
(2)