Installing The Ps Display Fonts - Sharp AR-P27 Guía De Instalación De Software

INSTALLING THE PS DISPLAY
FONTS
Fonts that can be used by the PS printer driver are contained on the "PRINTER UTILITIES" CD-ROM
that accompanies the PS3 expansion kit. Install these fonts as needed for the PS printer driver.
1
Insert the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit into your computer's
CD-ROM drive.
If your computer is configured for auto
start on the CD-ROM, proceed to step 4.
2
Click the [start] button, click [My
Computer] (
the [CD-ROM] icon (
If you are using Windows 98/Me/NT 4.0/2000,
double-click [My Computer], and then
double-click the [CD-ROM] icon.
3
Double-click the [Setup] icon (
If the language selection screen
Note
appears after you double click the
[Setup] icon, select the language that
you wish to use and click the [Next]
button. (Normally the correct language
is selected automatically.)
22
), and then double-click
).
).
4
Select the [PS Display Font] checkbox
and click the [Next] button.
Do not select "PS Printer Driver".
Caution
The PS printer driver for the machine
should only be installed from the
CD-ROM that accompanies the
AR-M258/M318 and the AR-P27 printer
expansion kit.
5
Follow the on-screen instructions.