Keypad Lock; Mon (Monitor) Function / Squelch; Scanning All The Channels; Menu" Key - Midland G9 Manual De Uso

14

Keypad lock

Keep pressed CALL/
confirmation. Only PTT, EMG and CALL/
function, keep pressed again CALL/

MON (Monitor) function / Squelch

20
The Monitor button is for temporarily excluding (opening) the squelch,
in order to listen to signals that are too weak to keep the squelch perma-
19
nently opened.
19
To activate the monitor function, keep pressed for about 2 seconds both
19
▲▼ at the same time. Follow the same procedure to deactivate the fun-
18
ction, or switch off and on the radio.
21
18
When MON is active, you will probably hear a constant background noise.
22
EMG
17
18
23
You can activate the Monitor feature only if the "Emergency" function is
24
17
16
disabled.
17 CALL
16 MENU
15
MENU
16

Scanning all the channels

Midland G9 Plus can automatically search for signals throughout the
bands by scanning the channels in rapid sequence. This function is useful
to find out any active channel.
When a signal is detected, the scanning pauses on that channel for 5 se-
conds.
Press ▲ for 2 seconds: the scanning will start.
To stop it, push PTT: the Midland G9 Plus will go back to the channel
from which the scanning originally started.
You can activate the scanning feature only if the "Emergency" function
is disabled.

"MENU" key

The following features can be selected by using the "MENU" button:
› Channel selection
› CTCSS tone setting
› DCS tone setting
› High/low power selection (only in the PMR446 band)
› VOX
› VibraCALL function
14 |
for about 5 seconds. and
20
20
21
EMG
CALL
21
22
EMG
CALL
MENU
23
22
EMG
24
23
24
15
15
remain active. To disable this
for 5 seconds approx.
20
21
22
23
24
15
Midland G9/G9E Plus instruction guide
will be displayed as