Technical Specifications - Vermeiren Illico Manual De Instrucciones

EN
NL
5

Technical specifications

The technical details below are only valid for this nursing bed, at standard settings and optimal
ambient conditions. Take these details into account during use.
The values are no longer applicable if your nursing bed has been modified, damaged or suffers
from severe wear.
Table 1: Technical specifications
Brand
Type
Model
Description
Max. weight of user
Length
Height
Width
Height of mattress support, adjustable
Total mass
Total mass of heaviest part
Max. angel head section, adjustable
Max. angle for upper leg
Max. angle for lower leg
Max. safe working load *
Nominal load of lifting pole
Mattress specifications
Clearance below bed for patient hoist
Castor wheels (4 pieces)
Motor of undercarriage
Motor of head section
Motor of knee-bend system (optional)
Handset
Transformer
Nominal voltage, transformer
Period switched on
Noise level
Class / Kind of protection
Storage and use temperature
Storage and use humidity
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm /1,5 kg / 1,5°.
* Max. safe working load = mass user weight + mass mattress + mass other accessories
Vermeiren
Nursing bed
Illico
783 mm - 1313 mm
Continuously from 298 to 828 mm (without mattress)
85 kg (excl. side rails, lifting pole and triangle)
Min. RG 35, thickness 120 mm, 2000 x 900 mm, max. 20 kg
Ø 100 mm, all wheels with brake
Linak LA40, IPX6
Linak LA27, IPX6
Linak LA27, IPX6
Linak HL7X045-01, IPX4
Linak CA40, IPX6
U : 100 - 240 V AC, 50/60 Hz
in
10%, Maximum 2 minutes then 18 minutes for non-use
Protection class II, application part Type B / IPX4
12
Technical specifications
Dimensions
140 kg
2080 mm
1024 mm
31 kg
70°
36,8°
-17,2°
170 kg
75 kg
150 mm
I : max. 2.5 A
in
~ 48 dB(A)
+5 °C to +40 °C
20% / 90%
Illico
2021-02