Klarstein Dunstabzugshaube Manual De Instrucciones página 35

Fix the brackets (optional)
• Drill at the marked points (1), (2), (3) (Solution 2), using a 10 mm drill bit.
• Insert the Wall Plugs into the holes (1), (2), (3) (Solution2).
• Fix the hood fixing bracket with 3 screws (5 x 50) at the horizontal line A.
• Fix the Chimney fixing bracket with 2 screws (5 x 50) at the horizontal line B.
Hook the hood body
• Hook the hood body to the bracket.
• Level the hood body itself.
• Lock screws (M5 x 12) on the hood fixing bracket to prevent the hood body from
accidently sliding off . Remove the filter from the inside of the hood body, fix the
screws to Wall Plugs at the points (3) (Solution 2).
Right Wrong
EN
35