To Set The Time; Manual Programming; Automatic Programming; Automatic Descaling - Cuisinart DCC2650E Instrucciones De Uso

8. Function knob:
a. PROG: to set the desired auto on time.
b. AUTO ON: auto-on feature to program the starting time of the
brew cycle.
c. AUTO OFF: auto-off feature up to 38 minutes after brew cycle
is finished.
d. button: to start the brew cycle directly.
e. button: to set the time of the day.
pot is removed from the heating plate to let you pour that first cup
midbrew.
B. To set the time
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
the LCD to set the time from noon to midnight. When there is no
indication, you will set AM times from 0 to noon.
C. No programming
number of cups (see height markings inside the reservoir).
obtained. The difference between this scale and the water reservoir
marks results from the amount of water lost in wetting the grounds.
of ground coffee in the filter. Use one measuring scoop per cup. This
average dose can be adjusted to suit your taste.
heating plate before switching the coffeemaker on.
or button for bold coffee.
N.B. For fewer than 5 cups, turn the function knob to
.
. The red indicator light illuminates and the brewing cycle
starts. The end of brewing cycle is signalled by 5 beep sounds.
16
position.
button for regular coffee
.
then push
to switch the unit off. The red indicator light goes off.
D. Automatic programming
stop.
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
then stop.
HR or MIN button to scroll through the digits. When the numbers
stop blinking, time is set.
N.B. The maximum duration for coffee maker to shut off is 38 minutes.
displayed.
N.B. For fewer than 5 cups, turn the function knob to
.
or button for bold coffee.
to engage the automatic programming. The
switched off and the AUTO ON button is switched on.
indicator light will come on.
E. Automatic descaling
Use after use, scaling builds up. Scaling interfers with fine
mechanics and gives coffee a hard and bitter taste. That is why
the appliance should be regularly descaled to ensure good
quality coffee. The descaling frequency depends upon the
hardness of your tap water and how often you use the coffemaker.
next to the
then push
button for regular coffee
button is