Setting The Auto Off Time; Brewing Coffee - Cuisinart SS-16 Serie Manual De Instrucciones

SETTING THE AUTO ON TIME
When you turn the function knob to PROG,
the previously selected AUTO ON time or the
default time (12:00) will flash.
1. Turn the function knob to PROG.
Use the HR and MIN buttons as above to
program your start-brew time.
2. Turn the function knob to AUTO ON.
Press the BREW/OFF button to activate
the program. When you press BREW/OFF,
the AUTO ON light will illuminate,
indicating the AUTO ON function has been
activated. LCD will display the current
time.
AUTO ON brew cycle begins.
The CARAFE button indicator light will
come on, and the BREW/OFF button
indicator light will flash slowly when the
brew cycle begins at the time you have
selected. When the brew cycle ends,
CARAFE button indicator light will go off
and the BREW/OFF button indicator light
will remain solid, indicating the unit is in
Keep Warm mode. Lights will turn off
when the Keep Warm cycle ends,
indicating the coffeemaker is ready for the
next brew.
NOTE: To start brew time at the same
time the next day, simply make sure the
function knob is at AUTO ON, and press
and release BREW/OFF once more.
The AUTO ON light will turn on.

SETTING THE AUTO OFF TIME

Turn the function knob to AUTO OFF
Use the HR and MIN buttons as above
to program your coffeemaker to shut off up to
four hours after brew cycle is finished. Default
time is set to two hours.
SETTING THE CARAFE
TEMPERATURE
Use this feature to control the temperature
of the coffee in the pot. Press the CARAFE
TEMP button to set your desired temperature
Low (L), Medium (M) or High (H).

BREWING COFFEE

Follow instructions in Setting Up Your
12-Cup Coffeemaker on page 9.
1. Insert the charcoal water filter
Follow directions for the preparation and
insertion of the filter on page 9.
2. Fill the water reservoir
Open the coffeemaker reservoir cover by
lifting it up. Pour in the desired amount of
water, using the water level indicator
located at the side of the coffeemaker.
3. Before brewing
Make sure the glass carafe is in position on
the heater plate and the top cover is closed.
Plug the cord into an electrical outlet.
4. Set preferences
a. Push the BOLD button if would like
a stronger brew. BOLD button indicator
light will illuminate.
NOTE: This feature can only be activated
when brewing hot coffee in CARAFE
mode.
b. Press the CARAFE TEMP button to
choose Low (L), Medium (M), or High
(H), and the heater plate will keep
coffee at the temperature you select.
c. Activate OVER ICE function to prepare
iced coffee. See page 11 for detailed
instructions.
NOTE: BOLD and CARAFE TEMP will be
disabled when in OVER ICE mode.
5. Add ground coffee
Remove the filter basket by grasping the
handle and lifting straight up. Insert a #4
paper filter or permanent filter. Be sure
that a paper filter is completely open and
fully inserted in the basket. It may help to
fold and flatten the seams of a paper filter
beforehand. Add 1 level scoop of ground
coffee per cup. Adjust the amount
according to taste.
NOTE: The maximum capacity for
ground coffee is 12 tablespoons for
this coffeemaker. Exceeding this
amount may cause overflow if the
coffee is too finely ground.
Replace the filter basket in the filter basket
holder, and press firmly on the cover to be
sure it closes securely.
6. Brewing coffee
Turn the function knob to BREW, and
press the CARAFE button and BREW/OFF
button; the CARAFE button indicator light
will go on and the BREW/OFF button
indicator light will flash slowly. Or set the
AUTO ON function (above left) and the
AUTO ON indicator will light.
10